The Writings of Jon is about aviation, how to, beekeeping, and anything that is of interest to me and to you!
Showing posts with label Rudder hinge. Show all posts
Showing posts with label Rudder hinge. Show all posts
Thursday, July 17, 2014
Rudder Post and Hinges
Today I drilled a series of 1 mm holes through the rudder post for the lower rudder hinge. Turning a series of holes into a nice neat sawn line required a bit of head scratching. I ended up taking this old saber saw blade in my hand and very gently pulling it from hole to hole, back and forth till I had a shallow trench in the rudder post. This particular blade just happened to be the exact same width as the hinge. I sawed very gently for quite some time and the trench turned into a cut. Eventually the saw blade came out the bottom of the wood and the rest was easy. Happy to say I was able to attain an absolutely perfect fit! The hinge fits so snugly that I actually had to tap it gently with a rubber mallet to push it through the slot.
I initially held the saber saw blade in my hand but this was very uncomfortable so I converted a piece of scrap into a quick and dirty handle in about five minutes. This made the job much easier.
The AN hardware fits very snugly but without issues. I put the bolts in just to make sure that they would go all the way through. They fit snug enough that I actually had to turn them in with a screw driver.
I think I should probably paint these hinges before putting them into the post for good. I was considering using POR 15. That stuff is amazing.
Subscribe to:
Posts (Atom)

